PLOT REPORT
-----------

Report File    : D:\CAD\User\Development\CTS-A\CTS-A (PCB - PLOT REPORT).txt
Report Written : Monday, July 22, 2013
Project Path   : D:\CAD\User\Development\CTS-A\CTS-A.prj
Design Path    : D:\CAD\User\Development\CTS-A\CTS-A.pcb
Design Title   : 
Created        : 01/05/2013 19:05:01
Last Saved     : 22/07/2013 15:54:03
Editing Time   : 1379 min
Units          : mm (precision 3)

DEVICE SETTINGS
---------------

---------------
Gerber Settings
---------------

    Leading zero suppression.
    G01 assumed throughout.
    Line termination <*> <CR> <LF>.
    2.3 format absolute inches.

    Format commands defined in Gerber file.
    Aperture table defined in Gerber file.
    Hardware arcs allowed.

--------------
Drill Settings
--------------

    Excellon Format 1
    Format 2.3 absolute in inches.
    No zero suppression.


PLOTS OUTPUT
------------

Gerber Output
-------------

    "D:\CAD\User\Development\CTS-A\CTS-A - Top Silk.gbr"

    Layers:
    -------
    Top Silk
    Board Outlines

    D-Code    Shape  (thou)
    -----------------------
    D11       Round 5
    D112       Round 1


Gerber Output
-------------

    "D:\CAD\User\Development\CTS-A\CTS-A - Bottom Copper.gbr"

    Layers:
    -------
    Bottom Copper

    D-Code    Shape  (thou)
    -----------------------
    D24       Round 79
    D28       Round 50
    D93       Round 236
    D104       Round 25
    D105       Round 175
    D106       Oval 98 X 250
    D107       Square 118
    D108       Square 79
    D109       Round 79
    D110       Round 94
    D111       Round 98
    D119       Round 118
    D147       Square 87
    D148       Round 87


Gerber Output
-------------

    "D:\CAD\User\Development\CTS-A\CTS-A - Bottom Copper (Resist).gbr"

    Layers:
    -------
    Bottom Copper

    D-Code    Shape  (thou)
    -----------------------
    D83       Round 89
    D88       Round 246
    D98       Round 185
    D99       Round 128
    D149       Oval 108 X 260
    D150       Square 128
    D151       Square 89
    D152       Round 89
    D153       Round 104
    D154       Square 97
    D155       Round 97


NC Drill Output
---------------

    Output:
    -------
    Plated Round Drill Holes
    Plated Slots
    Plated Board Outlines

    "D:\CAD\User\Development\CTS-A\CTS-A - Drill Data - Through Hole.drl"


    Tool             Size        Count  ID
    --------------------------------------
    T001        00.031 in            4   E
    T002        00.043 in           10   D
    T003        00.051 in            5   O
    T004        00.100 in            2   H
    T005        00.157 in            4   Q
    --------------------------------------
    All                             25
    --------------------------------------

NC Drill Output
---------------

    Output:
    -------
    Unplated Round Drill Holes
    Unplated Slots
    Unplated Board Outlines

    "D:\CAD\User\Development\CTS-A\CTS-A - Drill Data - Through Hole (Unplated).drl"


    Tool             Size        Count  ID
    --------------------------------------
    T001        00.025 in            1   
    --------------------------------------
    All                              1
    --------------------------------------

Gerber Output
-------------

    "D:\CAD\User\Development\CTS-A\CTS-A - Drill Ident Drawing - Through Hole.gbr"

    Layers:
    -------

    Drill Ident Drawing
    -------------------

    Drill     Plated    Size      Shape     ID        
    --------------------------------------------------
    43        Y         100       Round     D         
    31        Y         100       Round     E         
    100       Y         100       Round     H         
    51        Y         100       Round     O         
    157       Y         100       Round     Q         
    --------------------------------------------------

    D-Code    Shape  (thou)
    -----------------------
    D11       Round 5
    D87       Round 100


End Of Report.
